Ring

HPR-PF Series

"High Power Strobe Lights PF Series.

* Ring type for diffused lighting.
* Peak illuminance achieves 2.5 million lx.
* Realizes high-speed and accurate inspection.
* Solves your xenon flash lamp problems.
* Freely adjustable flash timing enables strobing within the exposure period of the camera."

LDR-PF Series

"High Power Strobe Lights PF Series.

* Ring type.
* Peak illuminance achieves 6.5 million lx.
* Realizes high-speed and accurate inspection.
* Solves your xenon flash lamp problems.
* Freely adjustable flash timing enables strobing within the exposure period of the camera."

OPR-SF Series

"[Not available in Japan]
No strobe controller required!
Ultra-high-brightness ring lighting"

OPR Series

"[Not available in Japan]
Lighting that manages brightness on its own"

HPRS_HPRM Series

"[Not available in Japan]
""FALUX sensing""* Included in HPRS Series. enables monitoring of brightness and feedback control.
*Included in HPRS Series only.
Achieves high-uniformity over a flexible LWD range by using a unique illuminating mechanism."

LKR Series

"LEDs are embedded around a light-guiding diffusion plate.
Uniform light is radiated towards the center from a light-emitting surface arranged at an angle to the workpiece."

LFR Series

"LEDs are embedded around a light-guiding diffusion plate.
Uniform light is radiated from a flat emitting surface.
The product lineup includes the LFR-100K and LFR-130K Light Units, in which light is radiated from an emitting surface arranged at an angle.
"

LDR-PF-LA Series

"High Power Strobe Lights PF Series.

* Low-Angle Ring type.
* Peak illuminance achieves 10 million lx.
* Realizes high-speed and accurate inspection.
* Solves your xenon flash lamp problems.
* Freely adjustable flash timing enables strobing within the exposure period of the camera."

LDR2-LA Series

"Any angle can be created through the use of flexible circuit boards.
The features of the workpiece can be clearly extracted with direct light from a low angle towards the center of the workpiece."

LDR2 Series

"Any angle can be created with CCS's unique flexible circuit boards.
The required irradiance is ensured by radiating direct light towards the center of the workpiece."

LDR-LA1 Series

"LEDs are mounted perpendicularly on a line-shaped board and arranged in a ring facing horizontally.
The thin design has a thickness of only 10 mm.
These Ring Lights are used extremely close to the workpiece."

HPR2 Series

"These Ring Lights have ""easy to use"", ""bright"", and ""uniform"" characteristics.
The product lineup includes abundant size variations, full color (RGB) models, and satisfying accessories such as the Light Joint Brackets."